Useful information will not hurt anyone, especially when it comes to the topic of how to remove acrylic nails at home. The question is very relevant, because many women face such a problem as a broken nail, at the most inopportune moment. During the work week, it is inconvenient to get out to see a master. Therefore, we have to resort to removing acrylic plates on their own.
Carefully planned actions and step-by-step implementation will help in this matter. The necessary tools can be found in the home cosmetic bag. By this article, we will consider how to remove nail polish coating, designs and drawings on the nails, applied with acrylic paints, which at first glance is difficult to remove.
The necessary accessories for removing acrylic nails
Before proceeding to the procedure of acrylic removal, you need to prepare the necessary tools that will be needed in the process of work. There are several options for removal: mechanical, chemical, as well as folk method. As strange as it may sound, but in the process of the existence of acrylic, there are a lot of ways and, mind you, effective ones that help in the removal of artificially reinforced plates.
Before you remove acrylic nails, you need to prepare the following tools:
An ordinary nail polish remover that contains acetone.
A saw with different abrasiveness 80/100/120 to choose from.
A router or orange peeler.
A polishing block or buff.
These tools can be found at every woman’s place. If any tool is missing, it can be purchased at any store. The price of tools is not high. First, we will consider the most low-budget option. If at home there is a machine with cutters, then the process can be accelerated and use a mechanical method of processing nails.
How to remove acrylic nails at home
Let’s consider how to remove acrylic nails at home, step by step. Before starting the procedure, you need to prepare foil and a cotton disk.
Cut the disk into four pieces so that the only piece fits on the plate. Too large a piece of the disk will fall on the lateral rollers and the cuticle, thereby burning the delicate perianal skin with the chemical composition. The foil should be divided into small strips, which will later wrap the finger.
Take a file of hard abrasiveness and remove the length.
Buff need to go over the surface of the plate. Remove the glossy coating.
Generously moisten a quarter of the disk and place it on the artificial nail.
Use foil to secure the disc to the plate and create a vacuum on the finger.
Wait 15 minutes and then remove the acrylic with an orange wand or pusher.
Pieces of remaining acrylic on the nails can be removed with a file. For such purposes, it is better to use a file not very hard abrasion or use a buff.
What nail color visually reduces the nail
In today’s world, girls are increasingly refusing long nails in favor of short nails: they are more…
Manicure, emphasizing the tan: choose a color and design
Tanned skin by itself looks very beautiful. But if you accentuate the chocolate shade correctly, the image…
How to remove acrylic nails with acetone
With acetone to remove the nails and carefully carry out the procedure can any girl. Act carefully, control the condition of the percolate skin, which is in a vacuum.
Acetone is a chemical agent and can adversely affect both the natural plate and the skin. While waiting for exposure, the periodical skin becomes dry, so you will need a cream or cosmetic oil after the procedure.
In addition, an important point is the very removal of acrylic with a wand. Masters, of course, use a metal pusher. Specialists control the force of pressure of the tool, so they do not damage the nail plate in the process of removal. It is better for beginners to use a chopstick. It is less harmful to the natural nail.
Masters of manicure in the process of work use special tweezers called catheter. At home, it is better not to resort to the use of this tool, as inept handling will cause painful sensations. It will be impossible to continue the procedure.
How to remove acrylic nails with dental floss
Floss is very strong, so it can be used to replace one of the tools: a pusher or a stick. However, only a few people can use floss, much less remove their own nails with it. However, this method exists, and it is effective. Therefore, we decided to tell a little about it.
Acrylic material is flossed after the plate is already well softened in acetone. First, you need to clamp the floss tightly with your index finger and thumb. Then, moving from the root part, you can clean the acrylic, moving towards the end.
It is not easy to remove acrylic in this way, as some fingers are difficult to clean with the thread itself. Moreover, careless removal will lead to the fact that you can accidentally tear the artificial nail and cause irreparable harm.
How to remove acrylic nails mechanically
The most popular way to remove acrylic and gel nails is to use a machine with cutters. This option is considered the fastest and safest. However, you need to press the finger very firmly in the process, so as not to feel the painful vibration of the cutter.
The coarse abrasion nozzle is able to remove the loose edge, as well as remove the artificially built-up coating. However, without the use of discs and a special product for removing acrylic, you can’t do without it. They are needed for the final stage, when a thin layer of material remains on the surface after the work of the cutter, which should be removed. Act in the same way, by soaking the remains of acrylic. Afterwards, clean up with a stick.
Acrylic powder in most cases has to be soaked. In order not to traumatize the delicate perianal skin, it is better to protect yourself and additionally use a cosmetic product. Before starting the procedure, masters recommend lubricating the lateral rollers and the cuticle with petroleum jelly or greasy cream. After that, apply a cotton pad soaked in acetone.
After removing the nails, it is necessary to use cuticle oil. The oil will soak the dried skin and eliminate the formation of microcracks on the skin.
If possible, cover the plate with a nourishing composition. Varnish with a vitamin complex and keratin will work perfectly for this. After a few weeks, you can go back to the master and do the nail design.
How do you remove a broken acrylic at home?
There are a lot of ways to remove a broken acrylic at home. It all depends on the size, location and material of the acrylic.
One way to remove a broken acrylic is by using a razor blade to cut out the area around the break. This will allow you to peel up the edges and then use your hands or pliers to pull it away from the wall.
Another way is to use a putty knife or screwdriver to work under the acrylic and pry it off from its frame.
If there are multiple smaller pieces, you can try removing them with your fingers or using tweezers for better grip.
If there is just one large piece, you can use pliers as well as heat gun or hair dryer for removal.
What to do when you break an acrylic nail, and it bleeds?
If you break an acrylic nail and it bleeds, there are some steps you can take to stop the bleeding.
First, wash your hands with soap and water.
Then, use a cotton ball or gauze pad to apply pressure to the broken nail for five minutes.
Finally, apply a topical antibiotic ointment over the wound and cover it with a bandaid.
How do you take off an acrylic nail that fell off?
For a nail that has just fallen off, you can use nail glue to reattach it. For a nail that has already started to grow out, you can file it down.
Some people find it difficult to take off an acrylic nail that has fallen off. If the acrylic is still wet and soft, then you can use a cotton pad soaked in acetone to remove the polish and the glue residue. If the acrylic is dry, then soak it in warm water for 5 minutes before removing the polish and glue residue with acetone.